• 105°C Temperature
    • 600V Rated voltage
    • 2.8mm Overall diameter
    • UL 1015 Wire/Cable type
    • Available in colors: Black, Blue, Green, Orange, Purple, Red and Yellow

    11.8″ Pre-crimped Lead Mini-Fit® 18 GA – Male

    $1.49
    • 105°C Temperature
    • 600V Rated voltage
    • 2.8mm Overall diameter
    • UL 1015 Wire/Cable type
    • Available in colors: Black, Blue, Green, Orange, Purple, Red and Yellow

    11.8″ Pre-crimped Lead Mini-Fit® 18 GA – Female

    $1.25
  • 6inch ring to ring 18awg jumpers

    6″ Jumper Lead 18 GA – Ring x Ring

    $0.52
    • 105°C Temperature
    • 600V Rated voltage
    • 2.8mm Overal diameter
    • 0.250 TE Connector QC Fully insulated
    • Available in colors: black and white

    4″ Jumper Lead 18 GA Fork x 3/4″ Strip

    $0.42
  • AD16-22SM-24V Flashing Red LED Indicator

    This range of pulsing indicator is perfect for use in alarm circuits. Flashing Light with interval beeping sound. Even better is the quick and easy installation with a back of panel lock nut and captive screw terminals. You are offered a voltage range of 12V AC/DC available in red and green. This range of LED indicators is rated IP30 and have an operational life of 30,000 hours

    • Power frequency withstand voltage: 2.5KW AC, 1min
    • Insulation resistance:> 2MΩ
    • Compared to the tracking index: CTI ≥ 100
    • Allowable voltage fluctuation: Ue ≤ 48V ± 5%; Ue> 48V ± 20%
    • Brightness: ≥75mcd
    • High brightness: ≥ 150mc
    • Continuous working life: ≥ 500,000 hours
    • Working temperature: -25 ℃ ~ +55 ℃

    Intermittent Buzzer Alarm Red Led (10-Pack), AD16-22SM

    Original price was: $76.90.Current price is: $51.99.
  • ODE R-Flex Metalized Pipe

    Wholly flexible, prefabricated pipe insulation manufactured from elastomeric rubber foam material in the form of pipes, for use on piping installations on cold and warm lines.

    • Elastomeric rubber foam pipe with Metalized PET film as their final facing layer
    • Has high strength and surface hardness by virtue of its characteristics
    • Increases the product’s water vapour diffusion resistance
    • Raises UV resistance
    • It is cost friendly

    ODE R-Flex Pipe Insulation

    $1.25
  • ODE R-Flex Sheet

    It is a closed-cell thermal insulation material manufactured from elastomeric rubber foam material in the form of sheets.

    It is the insulation material of choice for air conditioning and cooling systems for its thermal insulation performance and high water vapor resistance. The product is ideal for insulating large diameter pipes, and ventilation ducts with rectangular or round cross sections

    • Elastomeric rubber foam used for insulating chilled water and cooling system installations
    • It offers ideal solutions for heating, cooling installations and for ventilation systems
    • It offers maximum savings with its low thermal conductivity
    • It does not transmit water vapor thanks to its high µ (water vapor diffusion resistance factor) value
    • It is not affected by mold and microorganisms

    ODE R-Flex Roll Closed Cell Insulation

    $391.00$399.00
  • The best universal adhesive tape

     

    Insulation Tape ODE R Flex Tape 50x3x15

    $12.99
  • Waterline Gasket Nut

    1/2″ Waterline Gasket Nut (10-Pack)

    $2.70
  • Stainless steel Water Line Nut.

    1/2″ Hex Stainless Stell Water Line Nut (10-Pack)

    $3.99
  • The copper shell NTC Thermistor sensor is potted by epoxy resin, which is thermal conductive and moisture resistant. The high adhesive strength between PVC wire and encapsulating resin makes it suitable for temperature measurement, sensing and control in remote locations and for various environmental conditions.

    Temperature Probe NTC Thermistor Sensor

    $25.00
  • SYZ series centrifugal air-conditioning fans are based on SYT series, which are newly developed and manufactured products with internationally advanced by this company. It was developed by using high technology and with low noise and compact structure. It was specially designed for the air-conditioning. The flow rate and total pressure range of this series fan are from 800m /h to 5000m /h. It is the ideal equipment for the changeable air conditioners, tube type units, VAV system, heating and other kind of fan system.

    Yilida Blower SYZ7-7III

    $53.75
  • The Eon® motor is a drop-in upgrade for the original ECM 2.3 motor. The motor is commonly used in applications in residential HVAC furnaces and air handlers, commercial variable air volume systems and fan filter units. Eon is a lighter, more compact variable speed ECM that is backward compatible with the existing ECM 2.3 motor and fits easily into existing systems. Eon allows you to imagine and implement possibilities that no conventional induction motor or competing variable-speed technology could provide. The product is offered in a wide range of specifications.

    EON® Blower Motor