• 105°C Temperature
    • 600V Rated voltage
    • 2.8mm Overall diameter
    • UL 1015 Wire/Cable type
    • Available in colors: Black, Blue, Green, Orange, Purple, Red and Yellow

    11.8″ Pre-crimped Lead Mini-Fit® 18 GA – Female

    $1.25
  • IDC 16-Pin Dual Female Connector Flat Ribbon Cable Wire

    Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins. Suitable for digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors or 3D printer expansion, connecting circuit boards, LEDs, lights, computers

    • Double rows, 8 Pin female to 8 Pin female header with both end, compatible with 2.54mm spacing pin headers
    • Total length is 10″ (25cm) with 2.54mm Female to Female 16P 2 x 8 sockets
    • Wire: 28 AWG (7×36) Stranded 300V; Wire Pitch: 0.05″ (1.27 mm) Center Spacing
    • Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins

    16 Pin IDC Flat Ribbon Cable AWM 2651 (10 pcs)

    $38.10
    • 105°C Temperature
    • 600V Rated voltage
    • 2.8mm Overal diameter
    • 0.250 TE Connector QC Fully insulated
    • Available in colors: black and white

    4″ Jumper Lead 18 GA Fork x 3/4″ Strip

    $0.42
  • 6inch ring to ring 18awg jumpers

    6″ Jumper Lead 18 GA – Ring x Ring

    $0.52
  • Wiring Harness EON® Control

    The wiring harness Pika connector is designed for use on Pika Motors and is available for default in 45″ leads

    • Universal Mate-N-Lok Plug Housing
    • 18 AWG Leads (16 AWG for Power, Common and Ground)
    • 1/4″ Strip end
    • Applied on EON® Motors
    • Contact us for custom lengths, end or gauge wire

    ECM Pika Motor Harness

    $5.80
  • Wiring Harness Control Connector

    The wiring harness control connector is designed for use on ECM or PSC Motors and is available for default in 40″ leads. You can choice the appropriate set for your necessity (3 or 4 wires)

    • TE Mark III Positive Lock Connection Systems
    • 18 AWG Leads
    • 1/4″ Strip end
    • Applied on X-13 Motors
    • Wire colors: Brown, Blue, Red and Purple
    • Contact us for custom lengths, end or gauge wire

    ECM/PSC Motor Control Harness

    $5.94$6.10
  • Wiring Harness Power Connector

    The wiring harness Power connector is designed for use on ECM or PSC Motors and is available for default in 45″ leads

    • TE Mark III Positive Lock Connection Systems
    • 18 AWG Leads
    • 1/4″ Strip end
    • Applied on X-13 Motors
    • Wire colors: White, Green, Black and White
    • Contact us for custom lengths, end or gauge wire

    ECM/PSC Motor Power Harness

    $5.13
  • Wiring Harness EON® Control

    The wiring harness Power connector is designed for use on EON® Motors and is available for default in 40″ leads

    • Universal Mate-N-Lok Plug Housing
    • 20 AWG Leads
    • 1/4″ Strip end
    • Applied on EON® Motors
    • Wire colors: White, Red, Purple, Blue, Black and Brown
    • Contact us for custom lengths, end or gauge wire

    EON® Motor Control Harness

    $4.51
  • Wiring Harness EON® Power

    The wiring harness Power connector is designed for use on EON® Motors and is available for default in 41″ leads

    • Universal Mate-N-Lok Plug Housing
    • 18 AWG Leads
    • 1/4″ Strip end
    • Applied on EON® Motors
    • Wire colors: Black, White, Green and Red
    • Contact us for custom lengths, end or gauge wire

    EON® Motor Power Harness

    $4.51
    • 105°C Temperature
    • 600V Rated voltage
    • 2.8mm Overall diameter
    • UL 1015 Wire/Cable type
    • Available in colors: Black, Blue, Green, Orange, Purple, Red and Yellow

    MLX 11.8″ Pre-crimped Lead 18 GA – Female

    $0.99
    • 105°C Temperature
    • 600V Rated voltage
    • 2.8mm Overall diameter
    • UL 1015 Wire/Cable type
    • Available in colors: Black, Blue, Green, Orange, Purple, Red and Yellow

    MLX 11.8″ Pre-crimped Lead 18 GA – Male

    $0.99
  • The copper shell NTC Thermistor sensor is potted by epoxy resin, which is thermal conductive and moisture resistant. The high adhesive strength between PVC wire and encapsulating resin makes it suitable for temperature measurement, sensing and control in remote locations and for various environmental conditions.

    Temperature Probe NTC Thermistor Sensor

    $25.00